Oki ES3640eMFP Management Manual Download Page 179

Page: 179 / 220

7-179 Fiery Spooler for Mac OS computers

ES3640e MFP EFI Job Management Guide - 179

Fiery Spooler for Mac OS computers

For Mac OS, the Fiery Spooler interface is almost identical to that
of Fiery WebSpooler (see

“Connecting to a different Fiery from

Fiery Spooler”

on page 7-180).

Starting Fiery Spooler

Use the following procedure to start Fiery Spooler.

To start Fiery Spooler on a Mac OS computer

1. Double-click the Fiery Spooler icon.

2. Select the Fiery in the Chooser window.

For information on setting up the connection to the server, see the

User Software Installation Guide

Chapter 2

3. Click OK.

4. Log in to the Fiery.

• To log in as Administrator, enter the Administrator password and

click OK.

• To log in as Operator, enter the Operator password and click OK.

• To log in as Guest, click OK without entering a password.
The Fiery Spooler main window appears.

Summary of Contents for ES3640eMFP





























































































































































































































Search results

Summary of Contents for ES3640eMFP

Reviews:

Related manuals for ES3640eMFP

Brands by name

Popular brands

Oki ES3640eMFP, Management Manual

Search results

Summary of Contents for ES3640eMFP

Reviews:

Related manuals for ES3640eMFP

Brands by name

Popular brands