6
6-154 Advanced Features of DocBuilder Pro
ES3640e MFP EFI Job Management Guide - 154
Tips for using the Imposition feature of
DocBuilder Pro
This section provides information that will help you get the most
out of the imposition features of DocBuilder Pro.
Page-level operations
Consider the following when editing pages of a job:
•
Adding a binding offset
You can set gutters on each page independently to allow extra
room for binding. For more information, see
•
Perform all page-level edits in the Preview window
For best results, perform all desired page editing operations in the
Preview window
before
applying imposition settings to a file.
Although you can perform page edits, such as adding, deleting,
and duplicating pages, within the main Imposition window, these
edits will be lost when you apply imposition settings that alter the
page layout.
Saving imposed jobs
When you save an imposed job, DocBuilder Pro does the
following:
•
If new data has been added to the temporary PDF file, it is saved
to the Fiery under the name you specify in the Save As dialog box.
The default name that appears in the Save As dialog box is that of
the original spool file, with a new extension (.dbp). If you do not
intend to overwrite the source file, you must enter a new name for
the imposed job. The original PostScript or PDF remains intact,
even after the converted file has been edited and saved in the
Imposition window.
•
If imposition data has changed, the data is saved to the Fiery and
associated with the new PDF.
Summary of Contents for ES3640eMFP
Page 1: ......
