5
5-117 Imposition window
ES3640e MFP EFI Job Management Guide - 117
Imposition window
Note:
The imposition feature is not supported for PCL jobs.
From the Imposition window, you can impose the pages of a
document in an order and positioning suitable for printing and
binding. If you are connected to more than one server at once,
you can access the Imposition feature from one server only.
To open a job in the imposition window
1. Send the desired job to the Hold queue.
For information on using Command WorkStation, see Chapters
2. Select the spooled/held job in the Active Jobs window, and
choose Impose from the Actions menu. You can also right-click
the job and choose Impose from the menu that appears.
You can open a PostScript or PDF (Portable Document Format)
file, but it must show a spooled/held job status.
Note:
If you have installed the DocBuilder Pro option, you must
install a dongle on your workstation. If the dongle is not attached,
an error message appears. For more information, contact your
authorized service/support technician.
To impose a processed/held job, select the job in the Active Jobs
window and choose Remove Raster Data from the Actions menu
to put the job in a spooled/held status. Then choose Impose from
the Actions menu. To impose a printed job, select the job in the
Printed Jobs window and choose Hold from the Actions menu.
Summary of Contents for ES3640eMFP
Page 1: ......
