ES 3037/3037e Setting up • 65
Parallel menu
The defaults are
bold
.
Item
Value
Description
PARALLEL
Enable
; Disable
Selects parallel (Centronics) interface.
BI-DIRECTION
Enable
; Disable
Selects bi-directional communication.
ECP
Enable
; Disable
Selects ECP mode.
ACK WIDTH
NARROW
; MEDIUM;
WIDE)
Sets ACK width for compatible
reception:
Narrow = 0.5 µS
Medium = 1.0 µS
Wide = 3.0 µS
ACK/BUSY
TIMING
ACK-in-Busy;
ACK-while-Busy
Sets output order for ACK and BUSY
during reception.
ACK IN BUSY: BUSY=LOW to the
end of the ACK pulse
ACK WHILE BUSY: BUSY=LOW to
the centre of the ACK pulse.
I-PRIME
3 micro-sec; 50 micro-
sec;
Disable
Sets or disables the i-Prime signal
OFFLINE
RECEIVE
Enable;
Disable
When set to Enable, this function
maintains reception without changing
the interface signal, even though an
alarm occurs.
The interface stays open even if the
ON LINE button is pressed.
The interface issues a BUSY signal
only when the receive buffer is full or
when a service call occurs.
USB menu
The default settings are
bold
.
Item
Value
Description
USB
Enable
; Disable
Selects USB interface.
SOFT RESET
Enable;
Disable
Selects use of soft reset command.
OFFLINE
RECEIVE
Enable;
Disable
When set to Enable, this function
maintains reception without
changing the interface signal, even if
an alarm occurs. The interface stays
open even if the ON LINE button is
pressed. The interface issues a
BUSY signal only when the receive
buffer is full or when a service call
occurs.
