Oki CX4545 MFP, Management Manual

Page: 163 / 272

2.SETTING ITEMS (ADMIN)
Setting Fax Functions 161
2 SETTING ITEMS (ADMIN)
Setting Fax Functions
If the FAX Unit and the 2nd Line for FAX Unit (both units are optional) are not installed, only the following option is
available: “Discard and Reduction Print” option for RX Print. For details on other fax options, refer to the
GD-1250/
GD-1260 Operator’s Manual for FAX Unit “Chapter 6: SETTING ITEMS” .
If the FAX Unit (optional) is not installed, the setting items in this menu are applied to received Internet Fax jobs.

Setting the discard and reduction print option for the RX print
Set print settings for received Internet Fax originals that are to be printed.
Two print settings are available: discard print and reduction print.
Discard Print: ON, OFF
 ON (default setting):
When originals are up to 10 mm larger than the printing area, the area of the originals that exceeds the paper printing
area is discarded.

OFF: The received original is printed on two sheets of paper if its length exceeds the paper printing area.
* For DISCARD setting details, contact your service technician.
RX Reduction Print: ON, OFF
 ON (default setting):
If the received original is longer than the recording paper, it will be vertically reduced to 90% to fit on the recording
paper.
 OFF: The received original is printed on two sheets of paper if its length exceeds the paper printing area.
1
Press [FAX] in the ADMIN menu (1/2).
The FAX menu is displayed.
To display the ADMIN menu, see the following page:
 P.71 “Entering Admin Menu”
2
Press [RX PRINT].
The RX PRINT screen is displayed.