Oki CX2731MFP Advance User Manual Download Page 84

Page: 84 / 311

– Scanning:

Drivers and Software

MC361/MC561/CX2731 MFP Advanced User’s Guide

Make additional settings if necessary.

Click “Scan”.

Exit “Windows FAX and Scan”.

ActKey Software: Windows Only

Using the ActKey utility, you can start a scan job in specified settings

with a click.
When ActKey is installed, Network Configuration is also installed

simultaneously. For Network Configuration, refer to Refer to “Using

Network Configuration” on P. 86.

Note

The following procedures are explained using the MC561 as an

example.

Installing the Software

Insert the DVD supplied with your MFP in the CD/DVD drive.

Summary of Contents for CX2731MFP
























































































































































































































































































































Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands

Oki CX2731MFP, Advance User Manual

Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands