29
– Faxing:
Duplex Documents
MC361/MC561/CX2731 MFP Advanced User’s Guide
Duplex Documents ____________
You can transmit duplex documents using the ADF.
Note
You cannot use the document glass for this procedure.
1
Place your document with text face up in the ADF.
2
Press the <FAX> key.
3
Make sure that [Fax] is selected, then press the <OK> key to
open the fax standby screen.
4
Press the down arrow key to select [Fax Functions], then press
<OK>.
5
Press the down arrow key to select [DuplexScan], then press
<OK>.
6
Press the down arrow key to select a value, then press <OK>.
You can specify [Long edge bind] or [Short edge bind].
7
Press the left arrow key until the fax standby screen appears.
8
Specify a destination.
9
Press the <Mono Start> key to start transmission.
ADF and Document Glass _______
You can use both the ADF and the document glass when scanning
documents for a fax job. This allows you to send a document and a
part of a book as one fax.
1
Press the <FAX> key.
2
Make sure that [Fax] is selected, then press <OK> to open the
fax standby screen.
3
Press the down arrow key to select [Fax Functions], then press
<OK>.
4
Press the down arrow key to select [Continue Scan], then press
<OK>.
