Oki CX2731MFP Advance User Manual Download Page 279

Page: 279 / 311

279

– Issues:

Copying Issues

MC361/MC561/CX2731 MFP Advanced User’s Guide

Copying Issues_______________

Notes

If the following information does not solve the problem, call your

local service dealer.

Unable To Copy

Sympt

Point to check

Remedy

Unable
to
copy.

Is the MFP turned on?

Turn on the MFP.

Is the MFP initializing?

Wait until initializing is done.

Is your document
properly loaded on
the MFP?

Load the document properly on the
MFP.

Is there paper in the
tray?

Load paper in the tray.
Or, check that the paper casette is
installed on the MFP.

Is the proper size of
paper for your
document loaded in
the tray?

Load the proper size of paper for your
document.

Is the paper tray
selectable when
[

Paper Feed

] is set

to [

Auto

Press the <SETTING> key and select
[Paper Setup] > [Select Tray] >
[Copy] > the paper tray on which the
paper you use is loaded, and then
select [ON] or [ON(Prior)].

Summary of Contents for CX2731MFP
























































































































































































































































































































Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands

Oki CX2731MFP, Advance User Manual

Search results

Summary of Contents for CX2731MFP

Reviews:

Related manuals for CX2731MFP

Brands by name

Popular brands