background image

5 Registering from TopAccess

62    Managing Templates

— Internet Fax Setting (Private Template)

In the Internet Fax Setting page, you can specify the content of the Internet Fax to be sent.

1) Subject

This sets the subject of the Internet Faxes.  Select “Scanned from (Device Name) [(Template 
Name)] (Date) (Time)” to automatically insert the subject or enter the desired subject in the 
field.

2) From Address

Enter the email address of the sender.  When the recipient replies to received document, the 
message will be sent to this email address.

3) From Name

Enter the sender name of the Internet Fax.

4) Body

Enter the body message of the Internet Fax.  You can enter up to 1000 characters (including 
spaces).

5) File Format

Only “TIFF-S” format can be selected.

6) Fragment Page Size

Select the size of the message fragmentation.

1

2
3

4

5
6

Summary of Contents for CX 1145 MFP




































































































































































































































































































































Reviews: