Oki CX 1145 MFP, Admin Manual

Page: 177 / 323

7 TopAccess Administrator Mode
176 Setting up from TopAccess
5
Click [OK] to apply the changes.
When using the Internet Explorer, the settings that are displayed in each field may not be
changed even if you change the settings and click [Save]. However, the settings have
been changed in the equipment. In that case, click the Internet Fax submenu then the
page displays the current settings in each field.
Setting up the Internet Fax Settings
You can specify the fragment page size and default body strings that apply to the Internet Faxes.
1) From Address
Enter the email address of this equipment.
You must enter the email address in the “From Address” field to enable the Internet Fax
unless the From Address is being determined automatically by the User Management Set-
ting. For more information about User Management Setting, refer to the
User Management
Guide .
2) From Name
Enter the name of this equipment.
3) Subject (Inbound FAX routing)
Select the TTI as the subject for the Inbound Fax routing.
4) Number of Retry
Enter the number of times to retry sending the Internet Faxes when it fails.
5) Retry interval
Enter the interval to retry sending the Internet Faxes when it fails.
1
2
3
4
5
6
7
8