Preparing and connecting this machine to your PC
- 47 -
2. Setting the IP address, etc.
Set values suitable for the current environment on the operator panel.
This section takes for example a connection to a standard wired LAN (LAN1).
If you are using the optional Wired LAN module, please read "Wired(LAN2) Setup" instead of "Wired(LAN1)
Setup".
The following case is taken for example here.
(Example)
IP address of this machine: 192.168.0.2
Subnet mask: 255.255.255.0
Gateway address: 192.168.0.1
1
Power on this machine.
2
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and then
press «OK».
3
Press ▲ or ▼ to input the admin password, and press «OK».
(P.207)
4
Check that [Network Setup] is selected, and press «OK».
5
Press ▼ to select [Wired(LAN1) Setup], and press «OK».
6
Press ▼ to select [IP Address Set], and press «OK».