
Management of this machine
- 248 -
6
Select [Initialize] or [Format Partition], and then press «OK».
7
To initialize it, check that [Execute] is selected, and press «OK».
To format partition, select the partition to be formatted, and press «OK».
There are two methods to initialize a memory
[Initialize]: Initializes the open area range (displayed in the file list) of the flash memory.
[Format Partition]: Initializes the user information. You can format each partition of PCL/Common/PS.
8
When [Are you sure?] is displayed, select [Yes] and then press «OK».
To cancel the initialization, select [No] instead.
9
When [Execute Now?] is displayed, select [Yes] and then press «OK».
If you select [No], the display will return to [Flash Memory Setup], but the initialization will not be canceled.
Initialization will be done upon the next power on.
10
Power off this machine and power it back on.
Initializing settings of this machine
Restores settings of this machine to the factory default settings.
Initialization of settings of this machine will return the following data to the default factory settings.
[Menus] settings
[Admin Setup] settings
[Calibration] settings
1
Check that "Ready To Print" appears on the display.
If the machine is in the power saving mode, press «OK» to restore.
2
Press the scroll button ▼ on the
operator panel several times to select [Admin Setup], and then
press «OK».
3
Press ▲ or ▼ to input the admin password, and press «OK».
(P.207)
4
Press ▲ several times to select [Settings], and then press «OK».
5
Check that [Reset Settings] is selected, and press «OK».
6
Check that [Execute] is selected, and press «OK».
This machine restarts and the settings will be initialized.