Management of this machine
- 247 -
Initializing the settings
This section explains how to initialize the memory and the settings of this machine.
Initialization is done to delete the data and settings saved in this machine and restore the machine to its initial
settings.
When you forget the admin password, the settings cannot be initialized.
Initializing network settings
The network settings will return to factory defaults after initialization.
With this operation, all network settings will be initialized.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power saving mode, press «OK» to restore.
2
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and then
press «OK».
3
Press ▲ or ▼ to input the admin password, and press «OK».
(P.207)
4
Check that [Network Setup] is selected, and press «OK».
5
Check that [General Setup] is selected, and press «OK».
6
Press ▲ to select [Network Factory Defaults], and then press «OK».
7
Check that [Execute] is selected, and press «OK».
8
The display will return to the standby screen.
Initializing the flash memory
Once the flash memory is initialized, the following data will be deleted.
Data saved by [Shared Print] or [Private Print]
Form data
1
Check that "Ready To Print" appears on the display.
If the machine is in the power saving mode, press «OK» to restore.
2
Press the scroll button ▼ on the operator
panel several times to select [Admin Setup], and then
press «OK».
3
Press ▲ or ▼ to input the admin password, and press «OK».
(P.207)
4
Press ▲ or ▼ several times to select [Others Setup], and then press «OK».
5
Press ▼ to select [Flash Memory Setup], and then press «OK».