Home
/
Oki
/
COREFIDO B822dn
/
User Manual

Oki COREFIDO B822dn, User Manual, Page: 216 / 453

Share

Page: 216 / 453

Oki COREFIDO B822dn User Manual Download Page 216

Management of this machine

- 216 -

Changing settings of this machine

You can change settings of this machine from the web page.

1

Open the web page of this machine.

Opening the web page

(P.213)

2

Log in as an administrator.

Logging in as an administrator

(P.214)

3

Change the settings, and click [Apply].

You can change settings of this machine from the following tabs.



Printer Settings



Network Setup



Links

Saving configurations

The settings of this machine and the usage of consumables and maintenance parts can be saved as a CSV
file.

1

Open the web page of this machine.

Opening the web page

(P.213)

2

Click [Menu] on the upper right corner, and then select [Display and Save Printer Information] -
[Export MenuMap].

3

Click [Export], and save it with a name.

Communication encryption (SSL/TLS)

You can encrypt the communication between your PC or mobile device and this machine. The communication
is encrypted with SSL/TLS in the following cases.
A certificate is pre-installed on this machine to enable the communication using HTTPS.

Registering a certificate

You can use a certificate when sending data to this machine connected to a network.
The following two types of certificates can be registered.



Self-signed certificate

This certificate is issued by this machine.



Certificate issued by certificate authority

This certificate is signed and issued by an external certificate authority for CSR (Certificate Signing
Request) created by this machine.



Before registering a certificate, be sure to delete the certificate already registered in this machine.



If an IP address is set in [Common Name] of the certificate, the certificate will be invalidated when the machine's IP

address is changed after the certificate is registered. Please register the certificate again.

«
...
214
215
216
217
218
...
»

Summary of Contents for COREFIDO B822dn






































































































































































































































































































































































































































































Reviews:

No comments