Changing settings from the operator panel
- 106 -
Turning off the power automatically (Auto Power Off)
This machine comes with a function (Auto Power Off) to turn off the power automatically if it has not been used
for a certain period of time.
There are 3 types of settings for Auto Power Off, and the default factory setting is [Auto Config].
[Auto Config]: The power is turned off automatically if the machine has not been used for a certain period
of time, except in the following situations.
When the LAN cable is connected to the network interface connector
When the wireless LAN is enabled
[Enable]: The power is automatically turned off if this machine has not been used for a certain period of
time.
[Disable]: The Auto Power Off function is disabled. The power does not turn off automatically.
Auto Power Off does not work in the following cases.
By default, Auto Power Off does not work with a network connection (wired/wireless).
When an error has occurred
Follow the procedure below to change the Auto Power Off setting.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power saving mode, press «OK» to restore.
2
Press the scroll button ▼ on the operator panel several times to select [Admin Setup], and then
press «OK».
3
Press ▲ or ▼ to input the admin password, and press «OK».
(P.207)
4
Press ▼ several times to select [Power Setup], and then press «OK».