Changing settings from the operator panel
- 102 -
Changing settings
This section describes how to change menu settings from the operator panel.
See "
(P.110)" for a list of menu items.
1
Check that "Ready To Print" appears on the display.
If the machine is in the power saving mode, press «OK» to restore.
2
Press the scroll button ▲ or ▼ on the operator panel several times to select the category of the
item to be set, and then press «OK». Repeat until you see the category of the item to be set.
The display color of the selected item is highlighted.
3
Press ▲ or ▼ several times to select the item to be set, and then press «OK».
4
Press ▲ or ▼ to display the value to be set, and then press «OK». [*] appea
rs to the left of the
set value.
5
Press «CANCEL» to return to the standby screen.