Changing settings from the operator panel
- 101 -
Inputting text
You can input alphabetic or numeric characters by using the scroll button ▲ or ▼ on the operator panel. If a
same button is pressed in succession, the alphanumeric character will switch. To continue inputting with the
same button, press «OK» after inputting each alphanumeric character.
The following characters can be input when the corresponding button is pressed.
For a menu that can only input numbers, it will not switch to alphabetic characters.
Scroll button
Display order
▲
The order of display is as follows: Lower-
case letters → Symbols → Upper
-
case letters → Digits
(in ascending order).
The symbols are displayed in the following order.
* @ . _
- (space) + ! " $ % & ' ( ) , / : ; < = > ? [ ¥ ] ^ # ` { | } ~
▼
The order of display is
reverse to that when ▲ is pressed.
Example
To input "abc",
Press «▲» «OK», «▲» «▲» «OK», «▲» «▲» «▲» «OK».
The functions of the following button are described below.
«BACK»
Returns to the home screen when there is no determined character.
Erases the character being input when there are determined characters but the character being input is not
determined.
Erases one of the determined characters when there are determined characters and no character is being
input.