Changing settings from the operator panel
- 100 -
Parts identification of the operator panel
No.
Name
Function
1
Display
Displays the state of this machine and operation instructions.
There are two types of standby screens: "Show Remaining Toner" and
"Show Tray Information".
The factory default setting is "Show Remaining Toner".
2
«HELP» button
Displays the help screen. To close the screen, press the «HELP» button
again, or press the «BACK» or «CANCEL» button.
3
«BACK» button
Goes back to the previous screen.
4
«CANCEL» button
Cancels the current printing. Goes back to the standby screen when the
menu is displayed.
5
«OK» button
Confirms the highlighted item.
The machine wakes up when it is in the sleep mode.
6
Scrolls buttons ▲▼
Used to select a menu or scroll the screen display.It can be used to input
numbers in the numerical input screen.
7
POWER SAVE lamp
Lights green in the power save mode, and flashes green in the sleep
mode.
8
ATTENTION lamp
Indicates the state of this machine.
Lights off in the normal state.
On: Indicates that a minor error has occurred.
Flashing: Indicates that a major error has occurred.
9
ONLINE lamp
Lights on in green when the machine is online, and lights off when the
machine offline.