64
Maintenance
Edge sensors cleaning
The precision of the automatic media identification function will decrease if ink mist adheres to the edge sensors.
Therefore, it is necessary to clean the sensors periodically. The quantity of ink mist that will adhere to the sensors
depends on the print data and the printer usage conditions.
1
PRINTER READY
01: PAPER / 1626mm
Press the
MAINTENANCE
button.
2
MAINTENANCE
2
START MAINTENANCE
Press the
Down
button to select
PH
MAINTENANCE
.
3
MAINTENANCE
2
PH MAINTENANCE
Press the
OK
button.
4
>PH MAINTENANCE
2
SET PH FOR CHECK
,
Press the
Down
button to select
SET PH FOR
CHECK
, and then press the
OK
button.
5
>>SET PH FOR CHECK
OK?
Press the
OK
button.
6
CARRIAGE IS MOVING
PLEASE WAIT
Carriage stops moving.
The carriage moves to the maintenance area.
The printer issues a warning beep.
When the carriage moves, the printer issues a
warning beep.
To turn the warning beep off, refer to Turn the
warning beep off on
page 200
in the IP-6620
Color Inkjet Printer User’s Guide.
7
OPEN COVERS AND
CHECK PRINT HEADS
Open the front cover, and then the
maintenance area cover.
Summary of Contents for ColorPainter M-64S
Page 54: ...54 Printing on reflective sheeting...
Page 84: ...47260301EE Rev4...
