C9850 User’s Guide> 63
C
USTOM
PAGE
SIZE
This feature enables printing on non-standard sized print media.
The multipurpose tray is used for feeding non-standard media sizes.
Print media width can be from approximately 51mm to 328mm, and
its length can be from 128mm to 1200mm. Actual limits vary slightly
depending on which printer driver you use and your computer’s
operating system.
Some software applications may not produce the desired results
with non-standard print media sizes, and some experimentation
may be required to obtain the results you want.
Notes
If you are using heavy media, transparencies, envelopes or labels,
use the face up (straight through) paper feed path.
For face up printing (straight-through path), make sure the rear exit
is
open
and the paper support is extended.
> Paper is stacked in reverse order.
> Tray capacity is about 100 sheets. (Actual capacity depends on
paper weight.)
H
OW
TO
CREATE
,
EDIT
,
AND
DELETE
A
CUSTOM
PAGE
SIZE
1.
On the driver’s [Setup] tab, click the [Paper Feed Options...]
button.
2.
In the Paper Feed Options window, click [Custom Size...].
If you have previously saved any custom sizes they will be
listed in the Custom Size window.
3.
To create a new custom size:
a. Enter the desired dimensions in the Width and Length
boxes.
b. Enter a name for the new size in the Name box, and click
[Add>>] to save it in the list.
Summary of Contents for C9850hdn
