Access control > 114
A
CCESS
CONTROL
If your Administrator has enabled access control on your scanner, it will automatically start
up in access control mode. You will not be able to use it until you have provided valid login
information. If the access control setting is:
>
Job Accounting; you will need to provide a valid PIN (personal identification
number).
>
LDAP/Local Auth; you will need to provide a valid user ID and password.
After using it, you will be expected to log out, leaving the scanner unit in access control
mode, unable to be used by unauthorised users.
L
OGGING
IN
1.
If the Job Accounting screen (1) is displayed on the touch screen panel, use the
numeric keys to enter your PIN.
If the LDAP Login screen (2) is displayed on the touch screen panel, press the User
ID button and use the soft keyboard to enter your user name. Press OK to confirm.
Press the Password button and use the soft keyboard to enter your password. Press
OK to confirm.
2.
Press the Login button and the default Copy Mode screen appears, the scanner unit
now being available to use.
1
2
