2
2-3
Fiery on a TCP/IP network with Windows NT 4.0/2000/XP/Server 2003/Server 2003
Configuring a Windows NT 4.0/2000/Server 2003 server to
communicate with the Fiery
To configure a Windows NT 4.0/2000/Server 2003 server to communicate with the
Fiery, follow these general steps. More detail is provided in subsequent sections in this
chapter and in your Microsoft documentation.
•
Load the TCP/IP network protocol on the server and configure it with an IP address,
subnet mask, and gateway.
•
Enter the host name of the Fiery in the host name database used by your system (see
).
•
Perform Fiery Setup.
•
On the Windows NT 4.0/2000/Server 2003 server, create a printer for each Fiery print
connection, install the appropriate printer drivers, and (optionally) share the printer
on the network (see
).
•
Enter the host name and remote printer name of the Fiery in the printer connection.
For more information, see
•
If the Windows NT 4.0/2000/Server 2003 server is also a workstation, install Fiery
utilities (see the
User Software Installation Guide
).
Summary of Contents for C9800hdtn
Page 1: ...FIERY CONFIGURATION GUIDE C9800hdn C9800hdtn C9800 GA C9800 C9000...
Page 134: ......
Page 138: ......
Page 150: ......
