Oki C9800hdn, Software Installation Manual

Page: 52 / 104

1
1-38 Installing User Software on a Windows Computer
Setting up IPP printing with Windows 2000/XP/Server 2003
With Internet Printing Protocol (IPP), print jobs are sent to the Fiery over
the Internet.
IPP printing is supported directly for Windows 2000/XP/Server 2003 computers. IPP
printing is not supported on Windows NT 4.0.
N
OTE
:
The IPP setup procedures are performed after installing the appropriate printer
drivers (see “To install the PostScript or PCL printer driver for Windows
2000/XP/Server 2003” on page 1-27).
B
EFORE YOU BEGIN
1. Prepare the Fiery for TCP/IP printing.
2. Make sure the Fiery is configured for IPP printing. For more information, see Chapter 4
of the
Configuration Guide .
3. Specify the printing destination on your computer.
T
O SET UP
IPP
PRINTING WITH
W
INDOWS
2000/XP/S
ERVER
2003
1. Windows 2000: Click Start, choose Settings, and then choose Printers.
Windows XP: Click Start and choose Printers and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and
Faxes.
2. Windows 2000: Double-click the Add Printer icon and click Next.
Windows XP: Click Add Printer.
Windows Server 2003: Choose Add a printer
3. Select Network printer and click Next.