Oki C9800hdn, Configuration Manual

Page: 90 / 168

4
4-38 Performing Setup from the Control Panel
Publish Print Queue
Yes/No [Yes]
This option allows users to print (or download) jobs to the Print queue. Jobs that are
printed to the Print queue are spooled to the Fiery disk and printed on a first-in,
first-out basis. Only queues published in the Printer Setup are available to users.
N
OTE
:
To print to the Fiery over the parallel port, you must publish a queue or publish
the Direct connection.
Publish Hold Queue
Yes/No [Yes]
Use this option to allow users to print (or download) jobs to the Hold queue. Jobs in
the Hold queue can only be printed by copying or moving the jobs to the Print queue
with the job management tools.
Parallel Connection
Print Queue/Hold Queue/Direct Connection [Print Queue]
Use this option to determine where jobs printed to the parallel port are sent. Only the
print connections that you published are displayed.
This option appears only if you selected Yes for the Enable Parallel Port option in Net-
work Setup. If only one of the print connections is published, this option does not
appear and parallel port jobs are automatically printed to that connection.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Printer Setup; select No to return to the
main Setup menu without making any changes.
PostScript Setup options
PS (PostScript) Setup allows you to set defaults for the Fiery. Users can override most
of these defaults on a job-by-job basis. However, users printing from UNIX or DOS
command lines cannot override defaults from their applications. Therefore, you must
set defaults in PostScript Setup. For information about these defaults, see the
Printing Guide .