background image

4

4-4

Performing Setup from the Control Panel

Types of Setup screens

There are two types of Setup options:

When you have entered the settings, you must save the changes. You are usually 
prompted to do so. If you choose Yes, your settings overwrite previous settings. If you 
choose No, your previous settings are retained. If necessary, the system restarts after 
you exit from the Setup menu.

Multiple choice 
questions

Cycle through the available choices using the 

 or 

 

keys. When your required choice is displayed press the 
ENTER key to select it. The choice currently in operation 
is indicated by an asterisk (*).

Information

 

entry options

For text or numerical entries, cycle through the available 
characters or digits using the 

 and 

 keys. When the 

required character or digit is displayed press the ENTER 
key to select it.

For address fields in dotted decimal notation, each field is 
entered using the 

 or 

 keys. Pressing the ENTER key 

completes the current field and advances to the next one. 
Pressing ENTER after the last field completes the address 
entry.

Summary of Contents for C9800hdn









































































































































































Reviews: