4
4-1
Fiery Setup from the Control Panel
Setup is required the first time the printer is turned on after installation or if the hard
disk drive has just been replaced. In this initial Setup, you (or the service technician)
choose the language for Printer Control Panel menus and messages. If you do not
configure a particular Setup option, the Fiery uses default settings. Make sure the
settings are appropriate for the printing environment at your site.
Fiery Setup from the Control Panel
Setup performed from the Control Panel configures the Fiery to communicate with
other devices and manage print jobs sent to it.
Setup provides these groups of options:
•
Server Setup
to specify system options
•
Network Setup
to specify all the active network systems that transmit print jobs to
the Fiery
•
Parallel Setup
to determine if and how the parallel port is used
•
USB Setup
to determine if and how the USB port is used
•
Printer Setup
to specify how print jobs and queues are managed
•
PS Setup
to specify PostScript settings
•
PCL Setup
to specify PCL settings
•
Color Setup
to specify color settings
•
Job Log Setup
to specify how the Fiery handles its log of printed jobs
•
PrintMe Setup
to specify the PrintMe settings
•
Custom Process
to specify special custom color settings
•
Change Password
to create and change the administrator password
•
Language
to select the required language for the display panel and various printed
reports
•
Clear Server
clears all print jobs from the server
•
Factory Defaults
restores factory default settings
Chapter 4:
Performing
Setup from
the Control
Panel
Summary of Contents for C9800hdn
