Oki C9800hdn, Configuration Manual, Page: 152 / 168

A
A-4 Troubleshooting
In Network Setup, when you configure the IPX (Novell) connection, the Fiery queries
the network for Novell file servers and trees, and attaches to them temporarily. If
a guest login is enabled, it is used. If not, you are prompted to log in from
Command WorkStation.
If the selected NetWare file server or tree does not have a guest account, or if the guest
account has expired or been disabled by the NetWare supervisor, you are prompted to
notify the IPX (Novell) administrator. In that case, there are two options:
• Enable a guest account on the NetWare server or tree for the purpose of setup.
• Log in with a different account. At the
ENTER LOGIN NAME
screen, change the default
name ( guest ) to supervisor or enter another valid login name. When you are
prompted for a password, enter the correct password for the account you named.
For any Novell error, make sure:
• Your IPX (Novell) network is connected to the Fiery.
• The NetWare server you are trying to access is running.
Add Server, Enter Your Login
Name, Enter Your File Server
Password
(Network Setup > Service
Setup > PServer Setup >
Bindery Setup) No NetWare print
server found.
No print server was found when Fiery queried the file
server you selected.
You must configure a print server and a print queue for
every NetWare file server that will handle Fiery print jobs
(see
page 2-10 ).
Any Bindery Setup screen Novell error code, followed by
a message. Novell NetWare has reported an error. Command Work-
Station reports the error number and displays a
brief message.
For the most common errors (listed in the following table),
a screen is displayed that allows you to retry the action that
evoked the error, such as adding a server. If that is
not possible, you are prompted to notify the Novell admin-
istrator, who will need to troubleshoot the network.
Consult NetWare Administrator documentation for fur-
ther explanation of Novell error codes.
After this Setup screen This message Means