OkiLAN 8200e Network User’s Guide
214
Troubleshooting:
NetBEUI
The network interface card is not identified.
•
Turn the printer off and on again.
•
Make sure the network cable is correctly connected.
•
Change the cable and try again.
•
Make sure that [Microsoft network client] and [NetBEUI] have been
added to the network section of the control panel.
•
Make sure the NetBEUI protocol is set to Enable.
•
Make sure the factory setting of the workgroup name is PrintServer and
the computer name is ML+ the last six digits of the MAC address.
•
Make sure the computer name of the NIC is different from the computer
name on the network.
Error writing to Prn1.
•
Make sure the printer is online.
•
If there is an error message indicating the paper has run out, add more
paper and cancel the error.
•
Check whether another user is printing. Print after the other user has
finished.
Summary of Contents for C9600hdn
Page 1: ...59367301_cvr jpg...