manualshive.com logo in svg

Oki C9600hdn, Network And Configuration Manual, Page: 212 / 264

Share
Download
Oki C9600hdn Network And Configuration Manual Download Page 212

 OkiLAN 8200e Network User’s Guide

212

•

Make sure the Machine name is the same as the Print Server name set 
in the File Server.

Printer does not print.

•

Make sure the network cable is correctly connected. 

•

Change the cable and try again.

•

Turn the printer off and on again.

•

Make sure the NIC is connected to the File Server.

•

Make sure the printer driver has been mapped to the correct NetWare 
queue.

PostScript error occurs if a banner page is printed.

A PostScript banner page cannot be printed in NetWare 3.12 Remote 
Printer mode. If a PostScript printer is used and a banner page is printed, 
“PostScript error” displays. Turn the banner output Off in the client’s 
printer settings.

Summary of Contents for C9600hdn









































































































































































































































































Reviews:

No comments