manualshive.com logo in svg

Oki C9600hdn, Network And Configuration Manual, Page: 206 / 264

Share
Download
Oki C9600hdn Network And Configuration Manual Download Page 206

 OkiLAN 8200e Network User’s Guide

206

11. Click [Quit].

MAC OS 10.2x

1. Place the Drivers CD, supplied with your printer, in the CD-ROM drive. 
2. Double-click the icon that appears on the desktop.
3. Open the [MAC] folder.
4. Open the [Driver Installer] folder.
5. Open the folder for your language.
6. Double-click the [MAC Installer] icon.
7. Click [Continue].
8. Click [Accept] to accept the Software License Agreement.
9. Select [MAC OS X.1-X.2x Drivers] from the drop-down list, then click 

[Install].

10. Once the driver is installed, if you wish to install the Profile Assistant 

(and/or Print Job Accounting) utility as well, select it from the 
drop-down list, then click [Install].

11. Click [Quit].

MAC OS 10.3x

1. Place the Drivers CD, supplied with your printer, in the CD-ROM drive. 
2. Double-click the icon that appears on the desktop.
3. Open the [MAC] folder.
4. Open the [Driver Installer] folder.
5. Open the folder for your language.
6. Double-click the [MAC Installer] icon.
7. Click [Continue].
8. Click [Accept] to accept the Software License Agreement.
9. Select [MAC OS X.3x Driver] from the drop-down list, then click 

[Install].

10. Once the driver is installed, if you wish to install the Profile Assistant 

utility as well, select it from the drop-down list, then click [Install].

11. Click [Quit].

Summary of Contents for C9600hdn









































































































































































































































































Reviews:

No comments