manualshive.com logo in svg

Oki C9600hdn, Network And Configuration Manual, Page: 205 / 264

Share
Download
Oki C9600hdn Network And Configuration Manual Download Page 205

 OkiLAN 8200e Network User’s Guide

205

Printing from Macintosh:
Installing the Driver

MAC OS 9.1+

1. Place the Drivers CD, supplied with your printer, in the CD-ROM drive. 
2. Double-click the icon that appears on the desktop.
3. Open the [MAC] folder.
4. Open the [Driver Installer] folder.
5. Open the folder for your language.
6. Double-click the [MAC Installer] icon.
7. Click [Continue].
8. Click [Accept] to accept the Software License Agreement.
9. Select the installation type:

– To install the driver and all utilities, use the default [Custom Easy 

Install], and click [Install].

– To install the driver only—or the driver plus your selection of 

utilities—select [Custom Install] in the drop-down list. Click the 
boxes beside the items you wish to install, then click [Install].

10. Click [Quit].

MAC OS 10.1

1. Place the Drivers CD, supplied with your printer, in the CD-ROM drive. 
2. Double-click the icon that appears on the desktop.
3. Open the [MAC] folder.
4. Open the [Driver Installer] folder.
5. Open the folder for your language.
6. Double-click the [MAC Installer] icon.
7. Click [Continue].
8. Click [Accept] to accept the Software License Agreement.
9. Select [MAC OS X.1-X.2x Drivers] from the drop-down list, then click 

[Install].

10. Once the driver is installed, if you wish to install the PS Gamma 

Adjuster utility as well, select it from the drop-down list, then click 
[Install].

Summary of Contents for C9600hdn









































































































































































































































































Reviews:

No comments