manualshive.com logo in svg

Oki C9600hdn, Network And Configuration Manual, Page: 198 / 264

Share
Download
Oki C9600hdn Network And Configuration Manual Download Page 198

 OkiLAN 8200e Network User’s Guide

198

FTP (File Transfer Protocol) Printing

FTP is used for transferring a file with TCP/IP. If the print data is sent to a 
logical printer via FTP,  it is printed.
Refer to the workstation’s manual for details of the ftp command.
The following explanation uses:

•

print file = test.prn

•

printer name = okiprinter_lp

Logical Directories

The print server includes three logical directories.

  

     

Printing Example

1. Login to the network interface card.

When printing with ftp, use any values for name and password. 
However, if the user name is [root], the password set under TELNET 
or the utility are required. See the appropriate section for details.

Example

Logging in with host name printer (or IP address 172.168.20.127).
# ftp printer (or ftp 172.168.20.127
Connected to Cprinter
220 EthernetBoard OkiLAN Ver 1.1.0 FTP Server

Logical directory Used for

lp

Printing a file created using the printer driver.

sjis

Printing a text file of Shift JIS Kanji code. PostScript 
only.

euc

Printing a text file of the EUC Kanji code. PostScript only.

NOTE

You cannot send data to the root directory.

Summary of Contents for C9600hdn









































































































































































































































































Reviews:

No comments