manualshive.com logo in svg

Oki C9600hdn, Network And Configuration Manual, Page: 16 / 264

Share
Download
Oki C9600hdn Network And Configuration Manual Download Page 16

 OkiLAN 8200e Network User’s Guide

16

Configuration:
Using AdminManager Quick Setup

Introduction

   

The AdminManager Quick Setup utility allows you to configure the print 
server easily and simply without installing any software packages.
You can configure the following:

•

Enable/disable TCP/IP, NetWare, EtherTalk, NetBEUI protocols.

•

Set IP address, Subnet Mask and Gateway for TCP/IP manually or by 
using DHCP.

•

Set NetWare mode and create Queue/Print Server/Printer objects.

•

Zone name and Port name for EtherTalk.

Configuration requires a PC with one of the following Windows

®

 Operating 

Systems:

•

Windows XP

•

Windows 2000 Advanced Server/Professional

•

Windows Me/98

•

Windows NT Server 4.0/Work-station 4.0

Important!

• This utility can only be used on a PC that can be connected to the 

network with TCP/IP or IPX/SPX.

• This utility must be used on a PC that is located in the same 

segment as the printer.

• To create a NetWare queue, NetWare Client 32 or IntranetWare 

Client should be installed in your system.

Summary of Contents for C9600hdn









































































































































































































































































Reviews:

No comments