Oki C9600hdn, Network And Configuration Manual, Page: 137 / 264

OkiLAN 8200e Network User’s Guide
137
11. Check the settings. If they are correct, click [OK]. If you need to
make changes, click [Cancel], make any needed changes and click
[OK] to send the revised information to the print server.
12. Click [OK].
The “Security Alert” window appears.
13. Click [Yes].
The “Connect to” window appears.
14. Enter your User Name and Password, then click [OK].
The “Encryption Status” window appears.
15. Check the settings, then click [Submit].
Using AdminManager
1. Launch the AdminManager utility:
From the Drivers CD supplied with your printer : [Next]
→
select
language
→
[Custom Install]
→
[Network
Software] → [Installation/Config] → [Admin Mgr / Quick
Setup]
→
select language
→
[OKI Device Standard
Setup]
→
[Execute from CD-ROM].
From your desktop (if you installed the utility from the CD ):
[Start]
→
[Programs]
→
[OKI Setup Utility]
→
[Admin Manager].
2. Click the printer to configure from the list.
3. Click [Setup]
→
[OKI Device Setup].
The “Password” window appears.
4. Enter your password, then click [OK].