Configuration: Using AdminManager Standard Setup • 29
General Tab (Oki Device Setup)
The General tab allows you to change the admin password,
SNMP Write Community name and SNMP Read Community
name.
1. Click [Change].
2. Enter the current value, then enter the new value and
re-enter it under [Confirm …].
3. Click [OK].
NOTE
The default admin password is the last six digits of
the MAC Address, minus any punctuation marks.
E.g., for a MAC (Ethernet) Address of
00:80:87:A4:55:79, the password would be A45579.
8200e_AdminMgr_General_Tab.bmp