manualshive.com logo in svg

Oki C9600dn, Configuration Manual, Page: 195 / 259

Share
Download
Oki C9600dn Configuration Manual Download Page 195

Printing from UNIX: LPD and FTP • 195

Printer Status

Verify the printer status using the lpstat command:

# lpstat –pCprinter_lp

FTP (File Transfer Protocol) Printing

FTP is used for transferring a file with TCP/IP. If the print data is sent 
to a logical printer via FTP, it is printed.

Refer to the workstation’s manual for details of the ftp command.

The following explanation uses:

•

print file = test.prn

•

printer name = okiprinter_lp

Logical Directories

The print server includes three logical directories.

NOTE

The result of lpstat may not be displayed correctly 
depending on UNIX operating system specification 
(e.g. Solaris 2.x).

Logical directory

Used for

lp

Printing a file created using the printer driver.

sjis

Printing a text file of Shift JIS Kanji code.
PostScript only.

euc

Printing a text file of the EUC Kanji code. PostScript only.

NOTE

You cannot send data to the root directory.

Summary of Contents for C9600dn




































































































































































































































































Reviews:

No comments