Oki C931dn User Manual Download Page 27

Page: 27 / 147

- 27 -

Parts Nomenclature and Functions

Appendix

efore use

Setting Up

Printing

Basic D

evice Oper

ations

Index

Printer Interior

Front Interior

Toner cartridge

The remaining toner quantity is normally displayed

when "Display remaining toner quantity" has been

set using the control panel standby screen.

The toner cartridge is a consumable.

Slot

Set the toner cartridge here.

“Mounting Consumables” (P.46)

Belt unit

This device copies the toner to the paper.

The belt unit is a replaceable maintenance part.

Handle

Hold this handle when removing the belt unit.

Lock lever knob

Secures the belt unit.

Image drum/Slot

The image drum is set in the slot.

The image drum is set inside the printer main unit

before shipment from the factory.

The image drum is a consumable.

Belt unit lock lever

Secures the belt unit.

Waste toner box

This box holds the waste toner.

When the waste toner box is full, a message is

displayed on the control panel. The waste toner box

is a replaceable maintenance part.

Belt unit lever

Secures the belt unit.

Summary of Contents for C931dn




















































































































































Search results

Summary of Contents for C931dn

Reviews:

Related manuals for C931dn

Brands by name

Popular brands

Oki C931dn, User Manual

Search results

Summary of Contents for C931dn

Reviews:

Related manuals for C931dn

Brands by name

Popular brands