manualshive.com logo in svg

Oki C931 DICOM, User Manual, Page: 313 / 336

Share
Download
Oki C931 DICOM User Manual Download Page 313

1

2

3

5

4

Con

ven

ient print 

functions

Appendix

Index

Checking a

nd 

 

Cha

nging Printer 

 

Settings Using 

 

the Control 

Panel

Network 

Setup

Matching 

Colors

Using Utilit

y 

Softw

are

- 313 -

Table of setting items in the device setup screen

 

„

Panel Setup

 

z

Shaded areas are factory-set values.

Item

Details

Near Life Status

Enable

Disable

Sets the panel display control when a near life 

warning occurs for the image drum, fuser unit, or 

belt.

Near Life LED

Enable

Disable

Sets the alarm lamp ON control when a near life 

warning occurs for the toner, image drum, fuser 

unit, belt, or waste toner box.

Idle Display

Toner Gauge 

Paper Size

Sets the information displayed in the standby 

screen.

Panel Brightness During Operating

5

to

31

Adjusts the brightness (backlight luminosity) of the 

control panel LCD.

The set brightness is applied during control panel 

operations.

Panel Brightness While Power Save

0

to

1

to

31

Adjusts the brightness (backlight luminosity) of the 

control panel LCD.

The set brightness is applied after the panel 

backlight timer time has eplased from the last 

operation.

Panel Backlight Timer

10

to

30

to

300

Adjusts the time (s) from the last operation to 

when the panel brightness (during power save) is 

applied.

Front Lamp

Mode1

Mode2

Off

Sets the printer front lamp operations.

Mode1:

Lit when in standby mode, flashes slowly during 

processing, and flashes rapidly when an error 

occurs.

Mode2:

Lit when in standby mode, flashes slowly during 

processing, and OFF when an error occurs.

Off:

Normally OFF.

 

„

Time Setup

 

z

Shaded areas are factory-set values.

Item

Details

Date Format

yyyy/mm/dd

mm/dd/yyyy

dd/mm/yyyy

Sets the date display mode.

Time Zone

-12:00

to

+0:00

to

+13:00

Sets the time difference from GMT in 15-minute 

units. If the time zone setting is changed, the tome 

differences before and after the change is reflected 

in the current time.

Memo

 

z

The factory default is set to +9.00.

Daylight Saving

On

Off

Sets whether to display summertime.

On:

Advances the current time by 1 hour.

Off:

Turns back the current time by 1 hour.

Time Setting

2000/01/01 00 :00

to

2009/01/01 00 :00

to

2091/12/31 23 :59

Sets the time.

Memo

 

z

The factory default is to set the time.

Summary of Contents for C931 DICOM

















































































































































































































































































































































Reviews:

No comments