Graphic pro
57
W
INDOWS
Note
This information applies to the Windows PostScript driver only.
If you are using a source CMYK document, use the following
printer driver settings to perform a CMYK Ink Simulation:
1.
On the printer driver [Colour] tab, select [Graphic Pro]
(1)
and click [Options].
2.
Select [ICC Profile Colour Matching]
(2)
.
3.
Select the [CMYK Input profile]
(3)
that corresponds to
the device you are trying to match such as a SWOP or
Euroscale Press. If you have another CMYK Ink profile that
you wish to use, select it here as the appropriate “CMYK
Source x” profile.
Remember that the names “CMYK Source 1”, “CMYK
Source 2” and so on relate to the number assigned to the
profile using Profile Assistant. See
Use the [Preserve Black] option to keep the original grey
component (K channel) information. If [Preserve Black] is
1
2
3
4
5
Summary of Contents for C9000 Series
Page 1: ...PRINTING GUIDE C9600n C9600dn C9600hdn C9600hdtn C9600 C9000...
Page 24: ...24 Greyscale printing...
Page 100: ...100 Watermarks...
