- 139 -
Changing Network Settings From the Web Page
5
5.
Network Settings
Enabling IPv6
1
Access the printer’s web page and log in
as the administrator.
2
Select [
Admin Setup
].
3
Select [
Network Setup
]>[
TCP/IP
].
4
Select [
Enable
] for [
IPv6
].
5
Click [
Submit
].
The network card reboots to enable the new
settings.
Checking IPv6 Address
The IPv6 address is automatically assigned.
1
Select [
View Info
].
2
Select [
Network
]>[
TCP/IP
].
Memo
● When the global address is displayed only as zeros, it may
be an error due to the router being used.
Reference
● You can also check the IPv6 address in the network report
from the printer by pressing the <
ENTER
> button and
then selecting [
Print Information
] > [
Network
]. For
details on the report and how to print it, refer to
.
Using IEEE802.1X
Your printer supports IEEE802.1X authentication.
Be sure to configure the printer and your
computer before performing the following steps.
Reference
● For details on the initial setup and the IP address, refer to
the User’s Manual (Setup).
Configuring Your Printer for
IEEE802.1X
Using PEAP
1
Access the printer’s web page and log in
as the administrator.
2
Select [
Admin Setup
].
3
Select [
Network Setup
]>
[
IEEE802.1X
].
4
Select [
Enable
] for [
IEEE802.1X
].
5
Select [
PEAP
] for [
EAP Type
].
6
Enter a user name in [
EAP User
].
7
Enter a password in [
EAP Password
].
8
Select [
Authenticate Server
] and then
click [
Import
].
9
Enter the file name of the CA certificate
and then click [
OK
].
Specify a certificate issued by the certificate
authority from which the RADIUS server obtained
a certificate. A PEM, DER, and PKCS#7 file can be
imported.
10
Click [
Submit
].
The network card reboots to enable the new
settings.
11
When the standby screen appears on the
printer, turn off the printer.
12
“Connecting Your Printer to an
.
Using EAP-TLS
1
Access the printer’s web page and log in
as the administrator.
2
Select [
Admin Setup
].
Summary of Contents for C831n
Page 1: ......
Page 150: ...44902902EE Rev3...