Oki C824 User Manual Download Page 106

Page: 106 / 188

- 106 -

6. Troubleshooting

White Area on Paper is Lightly Stained

Cause

Solution

Reference

The paper has a static charge.

Use paper stored under proper
temperature and humidity conditions.

Loading Paper

Supported Paper

The paper is too thick.

Use thinner paper.

Loading Paper

Supported Paper

The toner is low.

If "Toner Low" or "Toner Empty.
Replace with new Toner Cartridge."
appears, replace the toner cartridge.

Replacing the Toner Cartridge

The Periphery of Characters is Smudged

Cause

Solution

Reference

The LED head is dirty.

Wipe the LED head with a soft tissue
paper.

Cleaning the LED Head

The paper is unsuitable.

Use recommended paper.

Loading Paper

Supported Paper

The paper is damp.

Replace the damp paper with new
paper.

Loading Paper

Supported Paper

Summary of Contents for C824





























































































































































































Search results

Summary of Contents for C824

Reviews:

Related manuals for C824

Brands by name

Popular brands

Oki C824, User Manual

Search results

Summary of Contents for C824

Reviews:

Related manuals for C824

Brands by name

Popular brands