Oki C824 Advanced Manual Download

Page: 129 / 189

- 129 -

6. Utility Software

Installing Software

Install the utility you want to use by following the procedure below.

• For Windows

Install utility software by using the Software DVD-ROM.

Connect the machine to a computer via a network or USB interface.

• Check the status of this machine before installing.

- This machine is turned on.

- This machine is connected to a network with a network cable and the IP address or other settings are set.

Insert the "Software DVD-ROM" into a computer.

When [AutoPlay] is displayed, click [Run Setup.exe].

• If the [User Account Control] dialog is displayed, click [Yes].

Select a language from the drop-down list.

Read the license agreement, and then click [Accept].

Read Environmental advice for Users and click [Next].

Click [Network Connection] or [USB Connection] corresponding to your
connection environment.

If the [Windows Security Alert] dialog is displayed, click [Allow access].

Select the model name of this machine, and then click [Next].

Click [Individual Install].

Click a driver or software to install.

Installation starts.

Summary of Contents for C824






























































































































































































Search results

Summary of Contents for C824

Reviews:

Related manuals for C824

Brands by name

Popular brands

Oki C824, Advanced Manual

Search results

Summary of Contents for C824

Reviews:

Related manuals for C824

Brands by name

Popular brands