Oki C823n, User Manual, Page: 22 / 134

- 22 -
Preparing Your Printer
1
1.
Setup
Power Save Mode and Deep Sleep Mode
Two-phase power conservation enables you to
save on power consumed by the printer.
„
Power Save Mode
When your printer is not used for a certain
period of time, it automatically enters the power
save mode to reduce the power consumption.
You can enter the power save mode manually
by pressing the < POWER SAVE > button on the
operator panel.
The <
POWER SAVE > button lights up green
while in this mode.
Memo
● By factory default, the time interval before entering the
power save mode is set to 1 minute. For how to change
the time that elapses before the printer enters the power
save mode, refer to “Setting the Time that Elapses Before
Entering the Power Save Mode” P.60 .
„
Deep Sleep Mode
Your printer goes from the power save mode to
the deep sleep mode after a set period of time.
In the deep sleep mode, the status of your
printer is almost the same as when it is turned
off.
The <
POWER SAVE > button blinks while in the
deep sleep mode.
Note
● The printer does not enter the deep sleep mode if an error
occurs.
Memo
● By factory default, the time interval before entering the
deep sleep mode is set to 15 minutes. For how to change
the time that elapses before the printer enters the deep
sleep mode, refer to “Setting the Time that Elapses Before
Entering the Deep Sleep Mode” P.61.
Reference
● For more detailed information on deep sleep mode, please
refer to the User’s Manual (Advanced).
„
Restoring a Printer from the
Power Saving Mode
To restore the printer from the power save
mode or the deep sleep mode, press the
< POWER SAVE > button on the operator panel.
Memo
● When the printer receives a print job from a computer or
other devices, it is restored automatically.
Auto Power Off Function
When a certain period of time elapses after
printing, this printer will turn off automatically.
Memo
● The factory default setting for time that elapses before the
printer power turns off automatically is 4 hours.
● For how to change the time that elapses before the
printer power turns off automatically, refer to “Settings for
Turning Power Off Automatically (Auto Power Off)” P.64 .
Note
● In the factory default setting, the auto power off mode
is disabled during network connection. To enable the
auto power off mode during network connection, refer to
“Settings for Turning Power Off Automatically (Auto Power
Off)” P.64 .