Network configuration > 25
O
PTION
MENU
In the
Option
menu, the following item can be selected:
H
ELP
MENU
In the Help menu,
About
is available as well as revision information for
AdminManager
.
ITEM
EXPLANATION
Use TCP/IP
Protocol
If this item is selected, AdminManager uses TCP/IP protocol to
search/configure network interface cards.
Use IPX/SPX
Protocol
If this item is selected, AdminManager uses IPX/SPX protocol
to search/configure network interface cards.
Environment
Setup
TCP/IP Tab
Set broadcast addresses that are used
to search printers using the TCP/IP
protocol. If
Use TCP/IP protocol
is
unchecked, the search will not be
carried out using TCP/IP.
NetWare Tab
Set network addresses that are used to
search printers via NetWare protocol. If
there any many NetWare file servers on
your network, specify the network
address to which the network card
belongs. If
Use NetWare protocol
is
unchecked, the search will not be
carried out using NetWare, but if
Auto
Search
is selected, AdminManager will search all networks
that AdminManager can detect.
SNMP Tab
Obtain the printer name via SNMP -
Select.
Enter Community name.
Add and Delete.
TimeOut Tab
Search Every
: Set response waiting
time from a network card in seconds.
Time Out
: Set time out between
AdminManager and the network
interface card in seconds.
Retry
: Set how many times the retry
will be carried out between
AdminManager and the network interface card.
Summary of Contents for C711WT
Page 1: ...Network Guide C711WT...