Oki C650/ES6450, Basic Operation Manual, Page: 40 / 180

Connecting to the PC after preparing this machine
- 40 -

SSID is also called the network name, ESSID or ESS-ID.

Encryption key is also called the network key, security key, password, or pre-shared key (PSK).
Connecting via an access point (Infrastructure)

Put this machine in an unobstructed view position near the wireless LAN access point. (The recommended distance is
30 m or less.)

It may be difficult to connect if there is a metal, aluminum sash or reinforced concrete wall between this machine and
the wireless LAN access point.

IEEE802.11a (W52/W53) is prohibited to use outdoors due to the Radio Law. Use it indoors only. Use it indoor only.

When using 2.4GHz for a connection, use it within the range of 1 to 11ch. 12ch and 13ch are applicable only to
devices for Korea. Please follow the laws and regulations of the country where it is used.

When using 5GHz, use it within the range of 36 to 48ch, 52 to 64ch, 100 to 140ch, 149 to 165ch.
1. Enabling the wireless LAN function
1
Power on this machine.
2
Press the scroll button ▼ on the ope rator panel several times to select [Admin Setup], and press
«OK».
3
Input the admin password using the numeric keypad, and press «OK».
Admin password (P.114)
4
Check that [Network Setup] is selected, and press «OK».
5
Check that [General Setup] is selected, and press «OK».
6
Check that [Extended Network] is selected, and press «OK».
7
Press ▼ to select [Wireless], and press «OK».