Oki C3400 Page 83 User Manual Download

Page: 83 / 140

Using the printer software> 83

SING

THE

PRINTER

SOFTWARE

TATUS

ONITOR

INDOWS

ONLY

)

The Status Monitor software is distinct from and installed
separately from the driver software.

The Status Monitor provides a readable indication of the printer
status as displayed on the indicator LEDs on the Operation Panel
(

see “The Operation Panel” on page 12.)

and allows you to access

the printer menus (listed at the end of this chapter) to set printer
parameters such as paper size etc.

NOTE
For reliable operation of the Status Monitor, ensure that the
USB cable is of length 2m maximum.

NOTE
The Status Monitor is available to Windows operating systems
only. Mac OS X has a “Printer Menu” utility that allows you to
change the user settings outlined in this chapter.

Summary of Contents for C3400













































































































































Search results

Summary of Contents for C3400

Reviews:

Related manuals for C3400

Brands by name

Popular brands

Oki C3400, User Manual

Search results

Summary of Contents for C3400

Reviews:

Related manuals for C3400

Brands by name

Popular brands