Oki C3400 Page 100 User Manual Download

Page: 100 / 140

Using the printer software> 100

RINTING

SETTINGS

To print a list of the printer settings:

Start the Status Monitor.

Select the Printer Setup tab.

Click on the

Printer Settings

button on the Printer Setup

tab.

Click on the Information menu and then select Print Menu
Map.

Click on the

Printer Menu

button to print a Menu Map of

printer settings.

HANGING

THE

DISPLAY

LANGUAGE

If required, carry out the following instructions to change the
language that is displayed in the Status Monitor.

Start the Status Monitor.

Select the Printer Setup tab.

Click on the

Printer Settings

button on the Printer Setup

tab.

In the System Configuration menu, select the required
language.

Click on the

Save

button.

NOTE
A menu map of printer settings can also be printed from the
Status Panel by holding down the

ON LINE

button for 2

seconds.

Summary of Contents for C3400













































































































































Search results

Summary of Contents for C3400

Reviews:

Related manuals for C3400

Brands by name

Popular brands

Oki C3400, User Manual

Search results

Summary of Contents for C3400

Reviews:

Related manuals for C3400

Brands by name

Popular brands