Oki C3400 Page 11 User Manual Download

Page: 11 / 140

Introduction> 11

NSIDE

YOUR

PRINTER

Press the Cover Open Release (7) to open the printer cover and
look inside the printer.

13.

Fuser unit.

The Fuser unit contains a heated

roller that fixes toner to the print

media (paper or card).

14.

Fuser lever.

The lever has a locked position for

when the toner cartridge is in

place and an unlocked position for

removal and changing.

15.

Toner cartridges and toner

cartridge levers.

The 4 toner cartridges hold dry

powdered ink. The lever locks the

toner cartridge into place on the

image drum or releases it for

changing.

16.

Image drum units.

The toner from the toner

cartridges adheres to the outer

plate of the image drum. The

image drum then transfers the

toner to the print media as it

passes through the printer.

17.

LED Heads.

4 LED (Light Emitting Diode)

Heads direct light onto the 4

image drums.

Summary of Contents for C3400













































































































































Search results

Summary of Contents for C3400

Reviews:

Related manuals for C3400

Brands by name

Popular brands

Oki C3400, User Manual

Search results

Summary of Contents for C3400

Reviews:

Related manuals for C3400

Brands by name

Popular brands