manualshive.com logo in svg

Oki C301, User Manual

Share
Download
Oki C301 User Manual Download Page 51

Menu functions > 51

USB 

MENU

This menu controls the operation of the printer’s USB data interface.

N

ETWORK

 

MENU

This menu controls the operation of the printer’s 10Base-T/100Base-TX network interface.

ITEM

SETTINGS

EXPLANATION

SOFT RESET

ENABLE / DISABLE

Enables or disables the SOFT RESET command.

SPEED

12Mbps / 480Mbps

Selects the interface speed.

OFFLINE RECEIVE

ENABLE / DISABLE

Enables or disables this function. When set to Enable, 
the interface retains a receive possible state even when 
switching to Offline. Interface sends the BUSY signal 
only when the receive buffer is full or a service call 
occurs.

SERIAL NUMBER

ENABLE / DISABLE

Specifies whether to ENABLE or DISABLE a USB serial 
number.
The USB serial number is used to identify the USB 
device connected to your PC.

NOTE
When you have changed any settings in the USB MENU, turn the printer OFF, 
then ON again.

ITEM

SETTINGS

EXPLANATION

TCP/IP

ENABLE / DISABLE

Enables or disables this network protocol.

IP VERSION

IP v4
IP v4+v6
IP v6

Applies to C331 and C531/ES5431 only.
Sets up the IP version.
Operates with IPv4 only (not valid with IPv6).
Operates with both IPv4 and IPv6.
Operates with IPv6 only (not valid with IPv4).

From this stage, if IPv6 only is set from UI, for example 
Telnet, “IP v6” appears as the value of IP Version on the 
operation panel. “IP v6” will disappear from the value if 
“IP v4” or “IP v4+v6” is selected.
Display Condition: TCP/IP should be enabled.

NETBEUI

ENABLE / DISABLE

Applies to C331 and C531/ES5431 only.
Enables or disables this network protocol.

NETBIOS OVER TCP

C331: ENABLE / 
DISABLE
C531/ES5431: ENABLE 
/ DISABLE

Applies to C331 and C531/ES5431 only.
Sets Enable/Disable of NetBIOS over TCP protocol.
Display Conditions:

>

> TCP/IP should be enabled.

>

> IP Version is not IPv6.

NETWARE

C331: ENABLE / 
DISABLE
C531/ES5431: ENABLE 
/ DISABLE

Applies to C331 and C531/ES5431 only.
Enables or disables this network protocol.

ETHERTALK

ENABLE / DISABLE

Applies to C331 and C531/ES5431 only.
Enables or disables this network protocol.

Summary of Contents for C301































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands