manualshive.com logo in svg

Oki B6250n, Reference Manual, Page: 83 / 173

Share
Download
Oki B6250n Reference Manual Download Page 83

B6250/B6500 User’s Guide> 83

P

ARALLEL

 M

ENU

The 

Parallel Menu 

provides access to the Parallel settings. Use the 

following procedure to enter the parallel menu:

1.

Press the 

MENU

 button on the control panel.

2.

Press the < > button until the text “

Parallel Menu

” is 

shown on the second line of the display.

3.

Press the < > button to enter the parallel menu.

4.

Press the 

<

>  or  < > 

buttons to move through the 

submenus.

5.

Press the < > button to enter the submenu.

Use the procedures in the following table to access and change the 
Parallel Menu settings:

SUBMENUS

DEFAULT 
SETTING

AVAILABLE 
SETTINGS

PROCEDURE FOR 
CHANGING SETTING

Parallel
This submenu 

allows you to 

set up the 

parallel 

interface. 

Enable

Enable
Disable

Press <

> or < > 

buttons to toggle between 

Enable and Disable.
Press <SELECT> to save the 

selection.

Bi-Direction
Enable 

bidirectional 

communication 

with the PC.

Enable

Enable
Disable

Press <

> or < > 

buttons to toggle between 

Enable and Disable.
Press <SELECT> to save the 

selection.

PS Protocol

ASCII

ASCII
Raw

Press <

> or < > 

buttons to toggle between 

EASCII and Raw.
Press <SELECT> to save the 

selection.

Summary of Contents for B6250n














































































































































































Reviews:

No comments